|
|
|
|
Item |
|
MSRP |
|
QST 400 model |
|
Sliding latch hinge mechanism - upper (top) hinge unit complete |
|
27.00 |
|
Handle assembly complete |
|
57.00 |
|
Wiring harness (lead wire) connecting handle to controller |
|
23.00 |
|
Sliding latch hinge mechanism - lower (bottom) hinge unit complete |
|
|
|
Manual control - combined ON/OFF switch and speed control |
|
18.00 |
|
Short aluminum frame section – above top hinge mechanism |
 |
13.00 |
|
Short frame section – above lower hinge mechanism |
 |
11.00 |
|
Long frame section – below lower hinge mechanism |
 |
17.00 |
|
Upper bag holder complete with straps |
|
23.00 |
|
Straps for upper or lower bag holder complete with fixing bolt sets |
|
15.00 |
|
Bottom bag holder and front wheel housing combined - complete with straps (does not include front wheel assembly) |
|
33.00 |
|
Front wheel assembly combined with bottom bag holder - complete with front wheel |
|
43.00 |
|
Front wheel (wheel only) |
|
19.00 |
|
Front wheel axle only - complete with nuts - bolts - bearings and spacers |
|
13.00 |
|
Rear stabilizing wheel (wheel only) |
|
19.00 |
|
Rear wheel axle complete with nuts - bolts - bearings and spacers |
|
13.00 |
|
Rear stabilizer wheel housing only |
|
23.00 |
|
Spring loaded securing pin for rear wheel |
|
11.00 |
|
Rear stabilizing wheel assembly complete (housing and wheel) |
|
47.00 |
|
T-bracket - tubular - connects rear stabilzer wheel to frame |
|
11.00 |
|
Nut/bolt - set - to secure motor/gearbox or drive coupling to axle (quantity 4) |
|
5.00 |
|
Complete motor and gearbox assembly - LINIX - 200 Watt - left (left hand side - viewed from the rear of the cart) axle mounting sleeve on the right side of gearbox - flat Anderson connector plug - see Note # 1 below |
|
129.00 |
|
Complete motor and gearbox assembly - LINIX - 200 Watt - right (right hand side - viewed from the rear of the cart) axle mounting sleeve on the left side of gearbox - flat Anderson connector plug - see Note # 1 below |
|
129.00 |
|
Controller - complete with main IC board - receiving IC board - all connections |
|
137.00 |
|
Deep cycle battery 12 volt 33 Ampere/hr Note : does not include a battery cover
|
|
117.00 |
|
Battery cover with power indicator - for 12 volt 33 Ampere/hr battery |
|
33.00 |
|
Battery charger complete with connection cables |
|
43.00 |
|
Connection cable only for battery charger - AC socket to charger |
|
11.00 |
|
Air tire (pneumatic tire) wheel assembly complete - for QST400 model |
|
39.00 |
|
Drive coupling for QST400 - (3-pronged style - set of two) |
|
13.00 |
|
Remote control trasnsmitter for QST400 |
|
37.00 |
|
Main drive wheel axle for QST400 (same axle as on the KXR400) |
|
23.00 |
|
Black plastic axle bearing |
|
9.00 |
|
Frame components |
|
Frame frame section ref # 1 - short section above top hinge mechanism |
|
13.00 |
|
Frame section ref # 2 - short section above lower hinge mechanism |
 |
11.00 |
|
Frame section ref # 3 - long section below lower hinge mechanism |
 |
17.00 |
|
Frame section # 04 - aluminum tube section - rear vertical |
|
23.00 |
|
Frame section # 05 - aluminum tube section - long - lower |
|
29.00 |
|
Frame section # 06 - aluminum tube section - horizintal |
|
11.00 |
|
Frame section # 07 - aluminum tube section - short |
|
9.00 |
|
Component ref # 08 - nylon axle bearing |
|
9.00 |
|
Component ref # 09 - black plastic spacer |
|
1.00 |
|
Component ref # 10 - black plastic tube end plug |
|
1.00 |
|
Component ref # 11 - black plastic spacer - double concave |
|
1.00 |
|
Component ref # 12 - frame bolt/nut |
|
3.00 |
|
Component ref # 13 - bolt/nut - front wheel assembly |
 |
1.00 |
|
Component ref # 14 - frame bolt/nut - short |
|
1.00 |
|
|
|
|
|